Home > Cms Error > Cms Error 41 Temporary Failure

Cms Error 41 Temporary Failure

Contents

CMS ERROR 50 "Requested facility not subscribed" This cause indicates that the requested short message service could not be provided by the network because the user has not completed the necessary IMSI not known). Now is the time to send the actual message: AT+CMGS="+31638740161″ Replace the above phone number with your own cell phone number. CMS ERROR 41 "Temporary failure" This cause indicates that the network is not functioning correctly and that the condition is not likely to last a long period of time; e.g., the check over here

Using the following command we can read the current values: AT+CSMP? The modem will reponse with a string like this: +CSMP: 1,169,0,0 OK The first value is a combination Please note that using this mode it is onluy possible to send simple text messages. To enable these extended commands, execute the following commands, or add them to your modems init string: AT+CMEE=1 AT&W Below you can find a list containing almost every error code supported I think may be operator is protecting customers from spam. http://www.ozekisms.com/index.php?ow_page_number=380

Cme Error 3

The application is working just fine. Under the section header for the modem configuration (e.g., [Modem - …], add SMSC=+phonenumber, where "+phonenumber" is the address of the SMSC. These error codes are defined in the ETSI GSM specifications, specifically GSM 07.05, GSM 03.40 and GSM 04.11. This parameter is only used for advanced messaging.

PPCG Jeopardy: Robbers At age 25, is it still okay to wear braces to work? There was about 40 unread messages in the receiving modem. Connect to the modem using HyperTerminal, and issue the command AT+CSQ. Cms Error 50 This includes almost all types of binary messages, as well as long text messages.

If you cannot, then there may be a problem with your account with the mobile operator. (Note: We have observed that with some mobile operators, if you buy a modem with Send the following command to the modem to set this parameters: AT+CSMP=17,167,0,16 If the modem responds with "OK" ,the modem is ready to send (flash) text messages with a validity When the application does not send SMS the modem is shut-down (Therefore every time I want to send SMS I have to turn on the modem). http://www.smssolutions.net/tutorials/gsm/gsmerrorcodes/ I am having this problem intermittently, get and error one minute, send a SMS successfully the next.

IMSI or directory number is not allocated to a subscriber). Cme Error 50 The modem will respond like this: +CSCS: ("GSM","PCCP437″,"CUSTOM","HEX") If this string contains "HEX" or "UCS2", Unicode seems to be supported. You can send Unicode messages by only converting the Unicode data to a HEX string and send this string to the modem. This parameter is used to select the characterset/messagetype.

Cms Error 38

General Troubleshooting Tips Before I get into the full CMS ERROR code list, it may be worth offering some general troubleshooting tips, as the error codes themselves are usually quite cryptic. click here now problems in MAP. 21 - "Short message transfer rejected"This cause indicates that the equipment sending this cause does not wish to accept this short message, although it could have accepted the Cme Error 3 Did you check the necessary timeouts for the actions you like to preform? –kilombo31 Apr 6 '14 at 7:37 add a comment| 1 Answer 1 active oldest votes up vote 0 Cms Error Codes If you try setting the SMSC value by manually editing SMSGW.INI … if the setting doesn't make a difference, always go back in and remove it immediately so that it doesn't

To check whether your modem supports this mode, just type the following command: AT+CSCS=? After i deleted all received messages error disappeared. Reduce as many adjacent chars as possible in string Authoritative source that <> and != are identical in performance in SQL Server Refreshing flash memories. The most common errors you will face when you want to send an SMS message are discussed in the following document: Send SMS Error Reasons. Cms Error 304

From what we've seen, when this error occurs, it is usually the same as error 500. This commands displays the codepages supported by the modem. Verify that you can actually send SMS messages using the SMS client in the mobile phone. http://trinitylabsupply.com/cms-error/cms-error-28002-general-failure.html CMS ERROR 81 "Invalid short message transfer reference value" This cause indicates that the equipment sending this cause has received a message with a short message reference which is not currently

Try changing the "SMS Access" to "GSM". Sms Error Code 69 WindowsManagement.com Internet Resource for Windows management software. To specify that you will use an HEX string to send the message, set the codepage to "HEX" or "UCS2" depending on the modem response.

However, in some environments, the modem doesn't know how to interpret the failure, and the fallback does not occur properly.

Can Mage Hand wield a Shield? The system returned: (22) Invalid argument The remote host or network may be down. CME ERROR's (GSM Equipment related codes) Error Description CME ERROR: 0 Phone failure CME ERROR: 1 No connection to phone CME ERROR: 2 Phone adapter link reserved CME ERROR: 3 Operation Gsm Error Codes WindowsDevelopment.com Internet Resource for Windows development software.

CMS ERROR 29 "Facility rejected" This cause indicates that the facility requested by the Mobile Station is not supported by the PLMN. There is no resolution for this problem, other than to use a different modem that does not suffer from this bug. +CMS ERROR 512 is defined as a manufacturer specific error. This mode allows you to send SMS messages using AT commands, without the need to encode the binairy PDU field of the SMS first. In the "SMSC" list, highlight the modem and press "Properties".

This is the first time I publish a message in this website so if something is unclear please let me know. :) Thanks for all the helpers.