Home > Cms Error > Cms Error 313

Cms Error 313

Contents

To specify that you will use an HEX string to send the message, set the codepage to "HEX" or "UCS2" depending on the modem response. The computer will then have to read the message from the indicated memory location and clear the memory location. 'AT+CMGF=1 To format SMS as a TEXT message 'AT+CNMI=1,1,0,0,0 Set IMSI not known). 29 - "Facility rejected"This cause indicates that the facility requested by the Mobile Station is not supported by the PLMN. 30 - "Unknown subscriber"This cause indicates that the Result Codes of AT Commands 17.

It seems to be a bug in commonly used modem chipsets, where they do not read this address automatically from the SIM. The system returned: (22) Invalid argument The remote host or network may be down. Template images by molotovcoketail. The fourth parameter contains the DCS (Data Coding Scheme). http://www.ozekisms.com/index.php?ow_page_number=380

Cms Error Codes

CMS ERROR Code List 1 - "Unassigned (unallocated) number"This cause indicates that the destination requested by the Mobile Station cannot be reached because, although the number is in a valid format, The best way to find this SMSC address is to move the SIM card from the modem temporarily to a phone, and go through the SMS configuration menus on the phone Search This Blog ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://0.0.0.10/ Connection to 0.0.0.10 failed.

It has incorrect information. Note that after the occurrence of a +CMS error, the GSM/GPRS modem or mobile phone will not process the remaining AT commands in the command line. What is an SMS Center / SMSC? 5. Cme Error 3 WindowsDevelopment.com Internet Resource for Windows development software.

WindowsShareware.com Internet Resource for Windows shareware software. Cms Error 304 Sometimes you will receive an error and you do not know the cause of this error. For instance, you are trying to read a phonebook entry before entering a pincode. click CMS ERROR 96 "Invalid mandatory information" This cause indicates that the equipment sending this cause has received a message where a mandatory information element is missing and/or has a content error

The modem will respond like this: +CSCS: ("GSM","PCCP437″,"CUSTOM","HEX") If this string contains "HEX" or "UCS2", Unicode seems to be supported. Gsm Error Codes These error codes are usually found in the SMSLib log. Unlike OK and ERROR, the +CMS ERROR final result code is only available to SMS AT commands. SMS & MMS Protocols NowSMS Features Developer APIs Mobile Operator MMSC How MMS Works What is a GSM Modem?

Cms Error 304

CMS ERROR 47 "Resources unavailable, unspecified" This cause is used to report a resource unavailable event only when no other cause applies. https://www.nowsms.com/gsm-modem-cms-error-code-list The term "not functioning correctly" indicates that a signaling message was unable to be delivered to the remote user; e.g., a physical layer or data link layer failure at the remote Cms Error Codes Sending SMS Messages from a Computer / PC Using AT Commands (AT+CMGS, AT+CMSS) 26. Cms Error 50 Purchase NowSMS Latest Release Supports Android Phones as GSM Modems to Send & Receive SMS + MMS Free Trial Versions Available:Now SMS/MMS GatewayNowSMS Lite Contact Us Now Wireless Limited Bourne House,

When there is a network error, for instance, when you try to send an SMS message when there is no network coverage, you will receive an error which starts with "+CMS Below shows some common causes of +CMS errors: A SIM card is not present in the GSM/GPRS modem or mobile phone. The memory of the GSM/GPRS modem, mobile phone or SIM card for storing SMS messages is full. Support Support Forums Quick Start Guide Developer APIs MMSC Training Documents MMS Protocol Overview Phone To MMSC Protocol (MM1) MMSC Interconnection Protocol (MM4) Tech Support Bulletins Tech Support Blog Software Updates Cms Error 500

CMS ERROR 29 "Facility rejected" This cause indicates that the facility requested by the Mobile Station is not supported by the PLMN. For errors related to SMS messaging, the +CMS ERROR final result code is returned. Field strength in dBm = -112 dBm+(2*X). The second parameter sets the Validity Period of the message.

Introduction to GSM / GPRS Wireless Modems 13. Cms Error 515 How to show live internet content through rss on y... Before I get to the list, and the sometimes cryptic definitions defined in the specifications, I want to highlight a few of the error codes that seem to occur most frequently.

Check with your provider. 'To send a SMS, the AT command to use is AT+CMGS .. 'AT+CMGS="+yyyyy" '> Your SMS text message here 'The "+yyyyy" is your receipent's

Now is the time to send the actual message: AT+CMGS="+31638740161″ Replace the above phone number with your own cell phone number. The AT command +CPIN (command name in text: Enter PIN) can be used to send the PIN to the SIM card. 312 The SIM card requires a PH-SIM PIN to operate. In our example we will set the modem to "HEX" : AT+CSCS="HEX" Next, we have to specify the correct DCS (Data Coding Scheme) for Unicode messages, which is 0x08. Sms Error Code 69 Home About TrinhThiYen's Blog Archive for AT Command GSM Equipment and Network ErrorCodes May 23, 2010 Filed under AT Command When controlling GSM devices using AT commands, the device can

Using the following command we can read the current values: AT+CSMP? The modem will reponse with a string like this: +CSMP: 1,169,0,0 OK The first value is a combination We can set this value by changing the fourth parameter of the AT+CSMP command to ‘8': AT+CSMP=1,167,0,8 The modem is now ready to send messages as Unicode. The peripherals have to send commands to the GSM unit to receive SMS and to erase SMS from the SIM card in order to clean memory. '+CMTI:"SM",x X stands for The SIM card requires a password (e.g.

It notifies you about the occurrence of a message service failure. 16.2.1. When there is a network error, for instance, when you try to send an SMS message when there is no network coverage, you will receive an error which starts with "+CMS